Sitemap  |  Home  |  Contact  |  CAS  |      中文
 
 
  Research
    Research Divisions
    Research Progress
    Achievements
    Research Programs
    Monthly Research Highlights
Location: Home>Research>Research Progress
Effects of glass fiber and molybdenum disulfide on tribological behaviors and PV limit of chopped carbon fiber reinforced Polytetrafluoroethylene composites
2016-11-25 ArticleSource:
Close Text Size: A A A Print

 
Abstract: In this work, tribological behaviors and PV limit of chopped carbon fiber, glass fibers and MoS2 reinforced PTFE composites were. investigated. The experiment results revealed that single incorporation of MoS2 could improve anti-wear property significantly under low velocity but shown a failure at 3 m/s. However, glass fibers deteriorated the wear resistance of the FIFE composite drastically as single filler. A synergistic effect was found for the combination of MoS2 and glass fibers, which lead to the best tribological properties with the highest PV limits of 9.5 MPa m/s at 1 m/s and 15 MPa m/s at 2 m/s.

KeyWords Plus: WEAR BEHAVIOR; SLIDING WEAR; PTFE COMPOSITES; POLYIMIDE COMPOSITES; SOLID LUBRICANTS; FRICTION; NANOCOMPOSITES; FILLERS; PEEK; NANOPARTICLES

Published in TRIBOLOGY INTERNATIONAL, 104 392-401; 10.1016/j.triboint.2016.01.015 DEC 2016

Address: No.18,Tianshui Middle Road,Lanzhou,P.R.China
ZIP Code:730000 Tel: 86-0931-4968009  Fax: 86-0931-8277088
E-mail: webeditor@licp.cas.cn