Abstract:In this study, we developed a new and rapid preparation method of alumina aerogels based on the sol-gel method and supercritical drying technique. In the developed method, the prepared wet gels were sealed to directly conduct supercritical drying without aging or solvent exchange which is required in conventional supercritical drying and ambient pressure drying techniques, which greatly shortened the preparation process. Lanthanum doped alumina aerogels with a high specific surface area (SSA) were prepared firstly according to the developed method and then its structure and thermal stability at high temperature were investigated. Investigation results proved that the incorporation of lanthanum resulted in the formation of LaAl11O18 on the surface of alumina particles, which distinctly delayed the transformation of the alpha-phase, and improved the thermal stability. Under the optimum atomic ratio of La/Al = 0.05, lanthanum doped alumina aerogels possessed high SSA and pore volume, while excessive lanthanum would result in the decreases in SSA and pore volume. Lanthanum doped alumina aerogels still had a high SSA and pore volume at 1000 degrees C and was not transformed into a-phase until the temperature rose to 1300 degrees C, exhibiting the excellent thermal stability. However, its SSA drastically decreased due to the collapse of pore structure.

KeyWords Plus:SUPERCRITICAL EXTRACTION; ELEVATED-TEMPERATURES; TRANSITION ALUMINA; SILICA AEROGELS; STABILIZATION; BOEHMITE; NANOPARTICLES; GAMMA-AL2O3; INSULATION; SUPPORT

Published in RSC ADVANCES, 6 (31):26271-26279; 10.1039/c5ra28053b 2016