High mechanical and tribological performance of polyimide nanocomposites reinforced by chopped carbon fibers in adverse operating conditions

 
Abstract: In the present work, the effects of nano-SiO2 and solid lubricants (SLs) such as PTFE and WS2 on friction and wear behavior of polyimide (PI) composites reinforced by carbon fibers were investigated in extremely wide PV (the product of velocity and pressure) factors. The results showed that the nano-SiO2 particles can reduce friction coefficient significantly under all conditions. Under low PV conditions, from the perspective of anti-wear property, the wear rate of SiO2/SLs/SCF/PI is remarkably reduced by the synergistic effect of nanoparticles and solid lubricants. Under PV value higher than 59.26 MPa m/s, however, it performs poor anti-wear property, which mainly due to the deteriorated mechanical properties by incorporating solid lubricants and thermal instability of solid lubricants. However, the nano particles improve the wear resistance of SiO2/SCF/PI considerably especially under high PV conditions and the PV limit is got at 152.37 MPa m/s. The protection of fiber-matrix interface by nanoparticles, the higher mechanical properties and high thermal stability of SiO2 are responsible for the improvement of PV limit.

KeyWords Plus:WEAR-RESISTANCE; EPOXY COMPOSITES; FRICTION; BEHAVIOR; GRAPHITE; NANOPARTICLES; LUBRICANTS; POLYMERS; PEEK; TRIBOFILMS

Published in COMPOSITES SCIENCE AND TECHNOLOGY, 134 251-257; 10.1016/j.compscitech.2016.08.011 OCT 6 2016

Copyright © Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Address: No.18,Tianshui Middle Road,Lanzhou,P.R.China ZIP Code:730000 Tel: 86-0931-4968009 Fax: 86-0931-8277088
E-mail: webeditor@licp.cas.cn Technical support: Qingyun Software